VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster) DTC CHECK / CLEAR

DTC CHECK/CLEAR

1. Check for DTCs.

   
   

   1. Turn the ignition switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the ignition switch to ON.

   4. Turn the GTS on.

   5. Enter the following menus: Chassis / ABS/VSC/TRC / DTC.

   6. Check the details of the DTCs Click here.

      Tech Tips

      Refer to the GTS operator's manual for further details.

2. Clear the DTCs.

   
   

   1. Turn the ignition switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the ignition switch to ON.

   4. Turn the GTS on.

   5. Enter the following menus: Chassis / ABS/VSC/TRC / DTC.

   6. Clear the DTCs by following the prompts on the GTS.

      Tech Tips

      Refer to the GTS operator's manual for further details.

END OF DTC CHECK/CLEAR

1. Turn the ignition switch to ON.

2. Check that the ABS warning light and slip indicator light go off within approximately 3 seconds after turning the ignition switch to ON.