VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster), Diagnostic DTC:C1268

DTC Code DTC Name
C1268 Transfer L4 Position Switch Circuit

DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
C1268 The skid control ECU receives an L4 abnormal status signal from the four wheel drive control ECU via the CAN.

  • Transfer system

  • Skid control ECU (Brake actuator assembly)

CAUTION / NOTICE / HINT

Note

When replacing the skid control ECU (brake actuator assembly), perform calibration Click here.

PROCEDURE


  1. INSPECT TRANSFER L4 SHIFT


    1. Shift the transfer to L4, and then drive the vehicle and check that there are no problems with the transfer system.

      OK
      There are no problems with the transfer system.

    NG

    GO TO TRANSFER SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    OK

  2. RECONFIRM DTC


    1. Clear the DTCs Click here.

    2. Shift the transfer to L4, drive the vehicle, and then check for DTCs Click here.

      Result
      Result Proceed to
      DTC is output A
      DTC is not output B

    A

    REPLACE BRAKE ACTUATOR ASSEMBLY Click here

    B

    USE SIMULATION METHOD TO CHECK Click here