TIRE PRESSURE WARNING SYSTEM Cannot Switch to Automatic ID Registration Mode

DESCRIPTION

When the tire pressure warning reset switch is turned on and off 3 times within 3 seconds (pressed → released → pressed → released → pressed → released), the tire pressure warning ECU and receiver switches to ID registration mode according to the automatic ID registration function.

When the system enters ID registration mode, the tire pressure warning light blinks 3 times as an answer back function.

The main body ECU (multiplex network body ECU) receives signals from the combination meter assembly via the CAN communication line.

WIRING DIAGRAM

Click here

PROCEDURE

1. CHECK TEST MODE (TIRE PRESSURE WARNING RESET SWITCH CHECK [DTC C2198])

   
   

   1. Perform the test mode inspection and check for the tire pressure warning reset switch check item (DTC C2198).

      Click here

      Result
      Proceed to NEXT

   
   

   NEXT

   GO TO DTC C2198 Click here