REAR STABILIZER BAR(w/o KDSS) INSTALLATION

PROCEDURE


  1. INSTALL REAR STABILIZER BAR


    1. A01XGW4

      Install the 2 stabilizer bushes to the stabilizer bar.

      Tech Tips

      Install the stabilizer bush to the outer side of the stabilizer bush stopper on the stabilizer bar.

      Text in Illustration
      B001DEF Outer Side

    2. Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.

      Torque:
      45 N*m  { 459 kgf*cm, 33 ft.*lbf }

  2. INSTALL REAR STABILIZER LINK ASSEMBLY LH


    1. Install the stabilizer link with a new nut.

      Torque:
      70 N*m  { 714 kgf*cm, 52 ft.*lbf }

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

    2. Install the 2 retainers and cushion to the stabilizer link.

    3. Hold the stabilizer bar link with a wrench, and then install the retainer, cushion and link with a new nut.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

  3. INSTALL REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL REAR WHEEL

    Torque:
    for Aluminum Wheel
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }
    for Steel Wheel
    112 N*m  { 1137 kgf*cm, 82 ft.*lbf }