REAR STABILIZER BAR(w/o KDSS) REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    1. A01XGCV

      Remove the nut and disconnect the stabilizer bar from the stabilizer link.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

    2. A01XJHZ

      Hold the stabilizer bar link with a wrench and remove the nut, retainer, cushion and link.

    3. Remove the 2 retainers and cushion from the stabilizer link.

  3. REMOVE REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE REAR STABILIZER BAR


    1. A01XLGS

      Remove the 4 bolts, 2 stabilizer brackets and stabilizer bar.

    2. Remove the 2 stabilizer bushes from the stabilizer bar.