REAR STABILIZER BAR(w/ KDSS) REMOVAL

PROCEDURE


  1. REMOVE SIDE STEP ASSEMBLY LH (for 5 Door)

    Click here

  2. REMOVE STABILIZER CONTROL VALVE PROTECTOR

    Click here

  3. DRAIN SUSPENSION FLUID

    Click here

  4. REMOVE REAR STABILIZER LOWER BRACKET


    1. A01XIEO

      Remove the 4 bolts and 2 rear stabilizer lower brackets.

  5. REMOVE REAR STABILIZER BAR SUB-ASSEMBLY


    1. A01XJBV

      Remove the 2 bolts, 2 nuts and rear stabilizer bar.

      Note

      Turn the bolts while holding the nuts.

    2. Remove the 2 stabilizer bushes from the rear stabilizer bar.

  6. DISCONNECT REAR STABILIZER CONTROL TUBE ASSEMBLY


    1. A01XKQ9

      Remove the 2 union bolts and 2 pressure port gaskets and disconnect the rear stabilizer control tube from the rear stabilizer control cylinder.

  7. REMOVE REAR STABILIZER CONTROL CYLINDER


    1. A01XL36

      Remove the bolt, nut and rear stabilizer control cylinder.

      Note

      Do not hold the rear stabilizer control cylinder by the cylinder boot.

      Tech Tips

      Turn the nut while holding the bolt.

    2. Remove the 2 bleeder plug caps from the rear stabilizer control cylinder.

  8. REMOVE REAR STABILIZER LINK ASSEMBLY


    1. A01XGBM

      Remove the bolt, nut and rear stabilizer link assembly.

      Tech Tips

      Turn the nut while holding the bolt.