REAR PNEUMATIC CYLINDER(w/ Air Suspension) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR PNEUMATIC CYLINDER ASSEMBLY LH


    1. Jack up the vehicle and support the frame with safety stands.

      Note


      • Perform this procedure with the rear axle assembly lowered.

      • Perform this procedure with the shock absorber installed.

    2. Disconnect the height control tube Click here.

    3. A01XFPH

      Remove the clip on the top of the pneumatic cylinder.

      Tech Tips

      If the clip cannot be removed easily, pass a wire through the hole and pull it.

    4. A01XDETE01
      Text in Illustration
      *a Matchmark

      Place matchmarks on the nut and rear pneumatic cylinder.

    5. Remove the nut.

    6. Discharge air from the pneumatic cylinder assembly to cause it to retract.

    7. Remove the rear pneumatic cylinder from the rear axle housing.