FRONT UPPER SUSPENSION ARM REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE SKID CONTROL SENSOR WIRE

    Click here

  3. REMOVE FRONT SUSPENSION UPPER ARM ASSEMBLY LH


    1. A01XFGRE08

      Support the front suspension lower arm LH with a jack.

    2. Remove the clip and nut.

    3. Using SST, disconnect the upper ball joint from the steering knuckle.

      SST
      09628-62011
    4. B001HC9

      Remove the bolt and disconnect the bracket.

    5. B001GOF

      Remove the bolt, 2 washers and nut.

    6. Remove the front suspension upper arm assembly.