HEIGHT CONTROL SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

  4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  5. REMOVE COMBINATION SWITCH ASSEMBLY (HEIGHT CONTROL SWITCH)


    1. B001D2Y

      Remove the 2 bolts.

    2. Detach the 3 clips.

    3. Remove the combination switch assembly (height control switch).

    4. B001DAF

      Disconnect the clamp and 4 connectors.