HEIGHT CONTROL OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT CENTER CLUSTER MODULE SWITCH (HEIGHT CONTROL OFF SWITCH)


    1. B001DVQE16
      Text in Illustration
      *a

      Component without harness connected

      (Height Control OFF Switch)

      Measure the resistance according to the values in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      5 (N) - 24(E) Height control OFF switch pressed Below 1 Ω
      Height control OFF switch not pressed 10 kΩ or higher

      If the result is not as specified, replace the center cluster module switch (height control OFF switch).