ABSORBER CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT CENTER CLUSTER MODULE SWITCH (ABSORBER CONTROL SWITCH)


    1. B001DVQE15
      Text in Illustration
      *a

      Component without harness connected

      (Absorber Control Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      8 (ECU2) - 24 (E) COMFORT position Below 1 Ω
      Normal position 10 kΩ or higher
      9 (ECU1) - 24 (E) SPORT position Below 1 Ω
      Normal position 10 kΩ or higher

      If the result is not as specified, replace the center cluster module switch (absorber control switch).