ABSORBER CONTROL ACTUATOR INSTALLATION

PROCEDURE

1. INSTALL SUSPENSION CONTROL BRACKET LH

   
   

   1. Using SST, install the bracket with the nut.

      SST

      09961-00950

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

2. INSTALL ABSORBER CONTROL ACTUATOR LH

   
   

   1. Using a hexagon wrench (4 mm), install the absorber control actuator with the 2 hexagon socket head cap bolts.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      Replace the absorber control actuator with a new one if it is dropped.

   2. Connect the connector, and then attach the 3 clamps.

      Note

      Securely connect the connector.

3. INSTALL FRONT WHEEL

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.