FRONT LOWER SUSPENSION ARM ON-VEHICLE INSPECTION

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. INSPECT FRONT SUSPENSION LOWER NO. 1 ARM


    1. Install the hub nuts to the disc.

    2. A01XJ6D

      Using a dial indicator, check the lower ball joint for excessive play by pushing the hub nuts up and down with a force of 294 N (30 kgf, 66 lbf).

      Maximum play
      0.5 mm (0.02 in.)

      If the play is more than the maximum, replace the lower arm.

  3. INSTALL FRONT WHEEL

    Torque:
    112 N*m  { 1142 kgf*cm, 83 ft.*lbf }