FRONT LOWER SUSPENSION ARM REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE LOWER FRONT BUMPER COVER (w/ KDSS)

    Click here

  3. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY (w/ KDSS)

    Click here

  4. REMOVE FRONT STABILIZER END BRACKET (w/ KDSS)

    Click here

  5. REMOVE FRONT STABILIZER BAR (w/ KDSS)

    Click here

  6. DISCONNECT FRONT SHOCK ABSORBER WITH COIL SPRING


    1. B001DMG

      Remove the bolt, nut and washer.

    2. Disconnect the front shock absorber with coil spring from the suspension lower arm.

  7. REMOVE FRONT NO. 1 SUSPENSION LOWER ARM SUB-ASSEMBLY LH


    1. B001EPU

      Remove the 2 bolts and disconnect the front lower ball joint attachment LH from the front axle.

    2. B001EL3E12
      Text in Illustration
      *a Matchmark

      Place matchmarks on the No. 2 camber adjust cam and toe adjust cam sub-assembly.

    3. Remove the nut, No. 2 camber adjust cam, camber adjust cam assembly, bolt, toe adjust cam sub-assembly, No. 2 toe adjust plate and front No. 1 suspension lower arm sub-assembly LH.

    4. Remove the cotter pin and nut.

    5. B001E9AE01

      Using SST, remove the front lower ball joint attachment LH.

      SST
      09950-40011   ( 09951-04010, 09954-04010, 09955-04031, 09955-04061, 09958-04011, 09952-04010 )