HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE


  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. B001EMNE02
      Text in Illustration
      *1 Matchmark

      Install the height control sensor with the 2 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

      Note

      Replace the rear height control sensor sub-assembly with a new one if it is dropped.

    2. Align the matchmarks on the link and bracket.

    3. Connect the sensor link with the nut.

      Torque:
      5.6 N*m  { 57 kgf*cm, 50 in.*lbf }

    4. Connect the connector, and then attach the connector.

    5. Attach the clamp.

  2. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR WHEEL

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. ADJUST VEHICLE HEIGHT

    Click here