SUSPENSION CONTROL ECU INSTALLATION

PROCEDURE

1. INSTALL SUSPENSION CONTROL ECU

   
   

   1. Install the suspension control ECU with the 2 bolts.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      
      

      • Replace the suspension control ECU with a new one if it is dropped.

      • Make sure the bracket rotation stopper touches the installation position.

   2. Connect the 3 connectors.

      Note

      Securely connect the connectors.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)

   Click here

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

5. PERFORM REGISTRATION

   Click here