REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD) INSTALLATION

PROCEDURE

1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

   
   

   1. Install a new gasket and the differential carrier assembly with the 10 nuts and 10 washers.

      Torque:

      52 N*m  { 530 kgf*cm, 38 ft.*lbf }

2. INSTALL REAR AXLE SHAFT LH

   
   

   1. Install the rear axle shaft LH Click here.

3. INSTALL REAR AXLE SHAFT RH

   Tech Tips

   Use the same procedure described for the LH side.

4. INSTALL PROPELLER SHAFT ASSEMBLY

   
   

   1. Install the propeller shaft assembly Click here.