FRONT DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH


    1. Remove the front drive shaft assembly LH Click here.

  2. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

    A01XDUPE13

    1. Using SST, tap out the 2 oil seals.

      SST
      09308-10010

  4. INSTALL DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL


    1. Apply MP grease to 2 new oil seals.

    2. A01XJO4E17
      Text in Illustration
      *1 Differential
      *2 Seal
      *a LH side
      *b RH side

      Using SST and a hammer, tap in the 2 oil seals.

      SST
      09550-00032
      09950-70010   ( 09951-07100 )
      Standard Oil Seal Depth
      Item Specified Condition
      LH side -0.45 to 0.45 mm (-0.018 to 0.018 in.)
      RH side 4.8 to 5.8 mm (0.189 to 0.229 in.)

      Note

      Make sure the LH and RH oil seals are installed in the proper locations.

  5. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH


    1. Install the front drive shaft assembly LH Click here.

  6. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.