REAR DIFFERENTIAL LOCK CONTROL SWITCH(w/ Combination Switch) INSPECTION

PROCEDURE


  1. INSPECT CENTER CLUSTER MODULE SWITCH (REAR DIFFERENTIAL LOCK CONTROL SWITCH)


    1. A01XK02E01
      Text in Illustration
      *a

      Component without harness connected

      (Center Cluster Module Switch (Rear Differential Lock Control Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      24 (E) - 15 (B) Pressed Below 1 Ω
      Not pressed 10 kΩ or higher

      If the result is not as specified, replace the differential lock switch.