REAR DIFFERENTIAL LOCK CONTROL SWITCH(w/ Combination Switch) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  4. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  5. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  6. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

    Click here

  7. REMOVE CENTER CLUSTER MODULE SWITCH (REAR DIFFERENTIAL LOCK CONTROL SWITCH)


    1. A01XE9A

      Remove the 2 bolts.

    2. Detach the 3 clips.

    3. Disconnect the connector and remove the center cluster module switch (rear differential lock control switch).

  8. REMOVE CENTER CLUSTER MODULE PANEL


    1. A01XKI5

      Remove the 4 screws and center cluster module panel from the center cluster module switch (rear differential lock control switch).