PROPELLER SHAFT ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL PROPELLER SHAFT ASSEMBLY

   
   

   1. Align the matchmarks on the propeller shaft flange and differential flange.

   2. Install the propeller shaft assembly with the 4 washer, 4 bolts and 4 nuts.

      Torque:

      88 N*m  { 899 kgf*cm, 65 ft.*lbf }

   3. Align the matchmarks on the propeller shaft flange and transfer flange.

   4. Install the propeller shaft assembly with the 4 washers and 4 nuts.

      Torque:

      88 N*m  { 899 kgf*cm, 65 ft.*lbf }