FRONT PROPELLER SHAFT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY


    1. Align the matchmarks on the yoke and differential flange.

    2. Install the propeller shaft assembly with the 4 washers, 4 bolts and 4 nuts.

      Torque:
      88 N*m  { 899 kgf*cm, 65 ft.*lbf }

    3. Align the matchmarks on the yoke and transfer flange.

    4. Install the propeller shaft assembly with the 4 washers and 4 nuts.

      Torque:
      88 N*m  { 899 kgf*cm, 65 ft.*lbf }

  2. INSTALL PROPELLER SHAFT HEAT INSULATOR WITH BRACKET (for 1GR-FE)


    1. Install the propeller shaft heat insulator with bracket with the 2 bolts.

      Torque:
      16 N*m  { 160 kgf*cm, 12 ft.*lbf }

  3. INSTALL FRONT EXHAUST PIPE

    for 5L-E:

    Click here

    for 1GR-FE:

    Click here

    for 2TR-FE:

    Click here

    for 1KD-FTV:

    Click here

    for 1GD-FTV:

    Click here