FRONT DRIVE SHAFT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. DRAIN DIFFERENTIAL OIL

    Click here

  3. REMOVE FRONT AXLE HUB GREASE CAP

    Click here

  4. REMOVE FRONT AXLE SHAFT NUT

    Click here

  5. REMOVE FRONT SPEED SENSOR

    Click here

  6. DISCONNECT TIE ROD END SUB-ASSEMBLY LH

    Click here

  7. DISCONNECT FRONT LOWER BALL JOINT ATTACHMENT LH


    1. B001HK4

      Remove the 2 bolts and disconnect the lower ball joint attachment from the steering knuckle.

  8. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH


    1. B001E30E07

      Using SST, remove the front drive shaft.

      SST
      09520-01010
      09520-24010   ( 09520-32040 )

      Note


      • Be careful not to damage the dust cover or oil seal.

      • Keep the drive shaft level while handling it.