CENTER DIFFERENTIAL LOCK SWITCH(w/o Combination Switch) INSPECTION

PROCEDURE


  1. INSPECT CENTER DIFFERENTIAL LOCK SWITCH


    1. A01XKPRE01
      Text in Illustration
      *a

      Component without harness connected

      Center Differential Lock Switch

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (L) - 4 (CPU) ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the center differential lock switch.