CENTER DIFFERENTIAL LOCK SWITCH(w/o Combination Switch) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  3. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

  4. REMOVE LOWER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 2 COMBINATION SWITCH ASSEMBLY (CENTER DIFFERENTIAL LOCK SWITCH) (for Automatic Transmission)


    1. Disconnect each connector.

    2. B001GTG

      Detach the 4 claws to remove the No. 2 combination switch assembly (center differential lock switch).

  6. REMOVE CENTER DIFFERENTIAL LOCK SWITCH (for Manual Transmission)


    1. B001IB4

      Disconnect each connector.

    2. Detach the 2 claws to remove the center differential lock switch.