FRONT AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

  3. REMOVE FRONT DISC

    Click here

  4. REMOVE FRONT AXLE HUB BOLT LH

    A01XLWDE05
    Text in Illustration
    *1 Nut
    *a Turn
    *b Hold

    1. Using SST and a screwdriver or equivalent to hold the axle hub, remove the front axle hub bolt.

      SST
      09611-12010

      Note

      Do not damage the threads of the hub bolt.

  5. INSTALL FRONT AXLE HUB BOLT LH

    A01XEQFE06
    Text in Illustration
    *1 Washer
    *2 Nut
    *a Turn
    *b Hold

    1. Insert a new hub bolt.

    2. Temporarily install a washer and hub nut to the hub bolt as shown in the illustration.

      Note

      Install a hub nut to prevent damage to the hub bolt.

    3. Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

    4. Remove the hub nut and washer.

      Note

      Do not damage the threads of the hub bolt.

  6. INSTALL FRONT DISC

    Click here

  7. INSTALL DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

  8. INSTALL FRONT WHEEL

    Torque:
    for Aluminum Wheel
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }
    for Steel Wheel
    112 N*m  { 1137 kgf*cm, 82 ft.*lbf }