TRANSFER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL TRANSFER ASSEMBLY

   
   

   1. Install the transfer assembly with the 8 bolts and bracket.

      Torque:

      24 N*m  { 245 kgf*cm, 18 ft.*lbf }

      Note

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER

   
   

   • for A750F: Click here

   • for AC60F (1GR-FE): Click here

   • for AC60F (1GD-FTV): Click here

   • for AC60F (2TR-FE): Click here

3. INSTALL MANUAL TRANSMISSION WITH TRANSFER

   
   

   • for G52F: Click here

   • for R150F: Click here

   • for RA61F (1GR-FE): Click here

   • for RA61F (1KD-FTV): Click here

   • for RA61F (1GD-FTV): Click here

4. ADD TRANSFER OIL

   Click here

5. CHECK FOR TRANSFER OIL LEAK