INPUT SHAFT DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 2 SYNCHRONIZER RING


    1. Remove the synchronizer ring from the input shaft.

  2. REMOVE INPUT SHAFT BEARING


    1. Remove the bearing from the input shaft.

  3. REMOVE FRONT BEARING SHAFT SNAP RING


    1. A01XMHS

      Using a snap ring expander, remove the snap ring from the input shaft.

  4. REMOVE INPUT SHAFT FRONT BEARING


    1. A01XEDXE01

      Using SST and a press, remove the front bearing from the input shaft.

      SST
      09950-00020