CLUTCH UNIT(for 1GR-FE) REMOVAL

PROCEDURE


  1. REMOVE MANUAL TRANSMISSION ASSEMBLY


    1. Remove the manual transmission Click here.

  2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

    A01XEJI

    1. Remove the clutch release fork with the clutch release bearing from the transmission unit.

    2. Remove the release fork support from the transmission unit.

    3. A01XEO7

      Remove the clip and clutch release bearing from the clutch release fork.

  3. REMOVE CLUTCH COVER ASSEMBLY


    1. A01XESXE04
      Text in Illustration
      *a Matchmark

      Put matchmarks on the clutch cover and flywheel.

    2. Loosen each set bolt one turn at a time until spring tension is released.

    3. Remove the 6 set bolts and pull off the clutch cover.

      Note

      Do not drop the clutch disc.

  4. REMOVE CLUTCH DISC ASSEMBLY

    Note

    Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.