CLUTCH MASTER CYLINDER(for LHD) REMOVAL

PROCEDURE


  1. DRAIN BRAKE FLUID FROM CLUTCH LINE

  2. DISCONNECT CLUTCH RESERVOIR TUBE

    B001D4I

    1. Disconnect the clutch reservoir tube.

      Tech Tips

      Use a container to collect the fluid.

  3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

    B001HN8

    1. Using a union nut wrench, disconnect the flexible hose tube.

      Tech Tips

      Use a container to collect the fluid.

  4. REMOVE DRIVER SIDE JUNCTION BLOCK ASSEMBLY


    1. Remove the driver side junction block Click here.

  5. REMOVE CLUTCH PEDAL WITH CLUTCH MASTER CYLINDER


    1. Disconnect the clutch start switch connector.

    2. w/ Cruise Control:

      Disconnect the clutch switch connector.

    3. B001H5L

      Remove the 2 nuts, bolt and clutch pedal with clutch master cylinder.

  6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. B001HOP

      Disconnect the clutch reservoir hose.

    2. B001G39

      Using a union nut wrench, disconnect the flexible tube.

    3. B001F99

      Remove the nut and clutch start switch from the clutch pedal support.

    4. B001E59

      Remove the clip and pin, and separate the push rod clevis from the clutch pedal.

    5. B001HE1

      Remove the 2 bolts and clutch master cylinder.