CLUTCH PEDAL(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

    A01XH4FE01
    Text in Illustration
    *1 MP grease

    1. Apply MP grease to the inside of a new clevis bush.

    2. Install the clevis bush to the clutch pedal.

      Tech Tips

      Install the clevis bush from the left side of the vehicle.

  2. INSTALL CLUTCH PEDAL TURNOVER BUSH

    A01XJYBE01
    Text in Illustration
    *1 MP grease

    1. Apply MP grease to the turnover bush.

    2. Install the turnover bush to the clutch pedal.

  3. INSTALL NO. 1 CLUTCH PEDAL CUSHION


    1. Install the 3 cushions to the clutch pedal.

  4. INSTALL CLUTCH PEDAL SHAFT COLLAR

    A01XEPKE01
    Text in Illustration
    *1 MP grease

    1. Apply MP grease to the shaft collar.

    2. Install the shaft collar to the clutch pedal.

  5. INSTALL CLUTCH PEDAL BUSH

    A01XHAVE01
    Text in Illustration
    *1 MP grease

    1. Apply MP grease to 2 new bushes.

    2. Install the 2 bushes to the clutch pedal.

  6. INSTALL CLUTCH PEDAL PAD

  7. INSTALL CLUTCH PEDAL STOPPER BOLT (for 5L-E and 1GR-FE without Cruise Control)


    1. Install the stopper bolt and temporarily install the lock nut.

      Tech Tips

      Tighten the lock nut to the specified torque when adjusting the clutch pedal.

  8. INSTALL CLUTCH SWITCH ASSEMBLY


    1. Install the clutch switch and temporarily install the lock nut.

      Tech Tips

      Tighten the lock nut to the specified torque when adjusting the clutch pedal.

  9. INSTALL CLUTCH PEDAL SPRING HOLDER

    A01XG75E01
    Text in Illustration
    *1 MP grease

    1. Apply MP grease to the contact surface of the spring holder.

    2. Install the spring holder.

  10. INSTALL CLUTCH PEDAL SUB-ASSEMBLY


    1. Install the clutch pedal and washer to the clutch pedal support with the nut and bolt.

      Torque:
      34 N*m  { 350 kgf*cm, 25 ft.*lbf }

      Tech Tips

      Install the bolt from the left side of the vehicle.

  11. INSTALL TURN OVER SPRING SEAT COMPRESSION SPRING


    1. Install the compression spring to the clutch pedal and spring holder.

  12. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY


    1. Install the clutch master cylinder Click here.