CLUTCH PEDAL(for LHD) REMOVAL

PROCEDURE


  1. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. Remove the clutch master cylinder Click here.

  2. REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING

    A01XMJH

    1. Remove the compression spring.

  3. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

    A01XLQ0

    1. Remove the nut, washer and bolt.

    2. Remove the clutch pedal from the clutch pedal support.

  4. REMOVE CLUTCH PEDAL SPRING HOLDER

    A01XKMF

    1. Remove the spring holder from the clutch pedal support.

  5. REMOVE CLUTCH SWITCH ASSEMBLY

    A01XF4F

    1. Loosen the lock nut and remove the clutch switch.

  6. REMOVE CLUTCH PEDAL STOPPER BOLT (for 5L-E and 1GR-FE without Cruise Control)

    A01XHW4

    1. Loosen the lock nut and remove the stopper bolt.

  7. REMOVE CLUTCH PEDAL PAD

  8. REMOVE CLUTCH PEDAL BUSH

    A01XL11

    1. Remove the 2 bushes from the clutch pedal.

  9. REMOVE CLUTCH PEDAL SHAFT COLLAR

    A01XL54

    1. Remove the shaft collar.

  10. REMOVE NO. 1 CLUTCH PEDAL CUSHION

    A01XIQ0

    1. Using needle-nose pliers, remove the 3 cushions from the clutch pedal.

  11. REMOVE CLUTCH PEDAL TURNOVER BUSH

    A01XILQ

    1. Remove the turnover bush from the clutch pedal.

  12. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

    A01XD27

    1. Using an 8 mm hexagon wrench and hammer, remove the clevis bush.