CLUTCH PEDAL SWITCH INSTALLATION

PROCEDURE

1. INSTALL CLUTCH START SWITCH ASSEMBLY

   
   

   1. for LHD:

      
      

      1. Install the clutch start switch assembly with the nut.

         Torque:

         16 N*m  { 160 kgf*cm, 12 ft.*lbf }

      2. Connect the clutch start switch connector.

   2. for RHD:

      
      

      1. Install the clutch start switch assembly with the nut.

         Torque:

         16 N*m  { 160 kgf*cm, 12 ft.*lbf }

      2. Connect the clutch start switch connector and attach the clamp.

2. INSPECT CLUTCH START SWITCH ASSEMBLY

   Click here