COMBINATION SWITCH INSTALLATION

PROCEDURE


  1. INSTALL ECO MODE SWITCH (Drive Mode)


    1. B001FMS

      Attach the 2 claws and install the eco mode switch (Drive Mode) to the console panel sub-assembly.

    2. Install the console panel sub-assembly.

      Click here

  2. INSTALL NO. 2 COMBINATION SWITCH ASSEMBLY (w/o Module Switch (2nd Start))


    1. B001GTG

      Attach the 4 claws and install the No. 2 combination switch assembly (w/o Module Switch (2nd Start)) to lower console panel sub-assembly.

    2. Install the lower console panel sub-assembly.

      Click here

  3. INSTALL PATTERN SELECT SWITCH ASSEMBLY (w/o Module Switch (2nd Start))


    1. B001I9T

      Attach the 2 claws and install the pattern select switch assembly (w/o Module Switch (2nd Start)) to the lower console panel sub-assembly.

    2. Install the lower console panel sub-assembly.

      Click here

  4. INSTALL COMBINATION SWITCH ASSEMBLY (w/ Module Switch (2nd Start))


    1. B001DAF

      Connect the clamp and 4 connectors to install the combination switch assembly (w/ Module Switch (2nd Start)).

    2. B001F19

      Attach the 3 claws and install the 2 bolts to the instrument panel.

    3. Install the integration control and panel assembly.

      Click here

    4. Install the center instrument cluster finish panel sub-assembly.

      Click here