OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A01XC9FE11

      Using SST and a hammer, tap in a new oil seal.

      SST
      09350-30020   ( 09351-32140 )

      Tech Tips

      Make sure the oil seal end is flush with the outer edge of the pump body.

    2. Coat the lip of the oil seal with MP grease.

  2. FIX FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. Place the oil pump body on the torque converter clutch.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A01XGBS

      Coat the driven gear with ATF.

    2. Install the driven gear to the oil pump body.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A01XI4R

      Coat the drive gear with ATF.

    2. Install the drive gear to the oil pump body.

  5. INSTALL FRONT OIL PUMP BODY O-RING


    1. A01XH6EE08
      Text in Illustration
      *1 New O-Ring

      Coat a new O-ring with ATF and install it to the oil pump body.

  6. INSTALL STATOR SHAFT ASSEMBLY


    1. A01XH6Q

      Align the bolt holes of the stator shaft with the bolt holes of the oil pump body and install the stator shaft to the oil pump body.

    2. Install the 14 bolts.

      Torque:
      11 N*m  { 110 kgf*cm, 8 ft.*lbf }

  7. INSTALL CLUTCH DRUM OIL SEAL RING


    1. A01XKOJE19

      Coat 3 new oil seal rings with ATF.

    2. Squeeze the ends of the 3 oil seal rings together with an overlap distance of 8 mm (0.314 in.) or less, and then install them to the starter shaft groove.

      Tech Tips

      After installing the oil seal rings, check that they rotate smoothly.

      Note

      Do not excessively widen the rings.

  8. INSPECT OIL PUMP DRIVE GEAR ROTATION

    Click here

  9. INSTALL AUTOMATIC TRANSMISSION CASE O-RING


    1. A01XFKTE07
      Text in Illustration
      *1 New O-Ring

      Coat a new O-ring with ATF and install it to the oil pump assembly.