COMBINATION SWITCH REMOVAL

PROCEDURE


  1. REMOVE COMBINATION SWITCH ASSEMBLY (w/ Module Switch (2nd Start))


    1. Remove the center instrument cluster finish panel sub-assembly.

      Click here

    2. Remove the integration control and panel assembly.

      Click here

    3. B001F19

      Remove the 2 bolts and detach the 3 claws from the instrument panel.

    4. B001DAF

      Disconnect the clamp and 4 connectors, remove the combination switch assembly (w/ Module Switch (2nd Start)).

  2. REMOVE NO. 2 COMBINATION SWITCH ASSEMBLY (w/o Module Switch (2nd Start))


    1. Remove the lower console panel sub-assembly.

      Click here

    2. B001GTG

      Detach the 4 claws and remove the No. 2 combination switch assembly (w/o Module Switch (2nd Start)) from the lower console panel sub-assembly.