OIL COOLER REMOVAL

PROCEDURE


  1. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  3. REMOVE FRONT FENDER APRON SEAL RH

    Click here

  4. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH

    Click here

  5. REMOVE NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE


    1. A01XKMJ

      Detach the claw to open the No. 1 flexible hose clamp.

    2. Disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the radiator.

    3. Disconnect the 2 hoses from the oil cooler inlet tube and No. 1 oil cooler outlet tube and remove them.

      Note

      When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.

  6. REMOVE NO. 1 OIL COOLER INLET TUBE AND NO. 1 OIL COOLER OUTLET TUBE

    B001GP9

    1. Using a union nut wrench, disconnect the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube from each oil cooler tube union.

    2. Remove the 3 bolts to open the 3 flexible hose clamps and remove the 2 oil cooler tubes.

    3. Remove the 2 bolts and 2 flexible hose clamps.