PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the switch connector.

    2. A01XI9F

      Using a screwdriver, bend the tabs of the lock washer.

    3. A01XIH2

      Remove the lock nut and lock washer.

    4. A01XDG8

      Remove the bolt and switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.