VALVE BODY ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT SHIFT SOLENOID VALVE SR

   

   Text in Illustration

   *a	Component without harness connected (Shift Solenoid Valve SR)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition Shift solenoid valve SR connector terminal - Shift solenoid valve SR body 20°C (68°F) 11 to 15 Ω

   2. Apply 12 V of battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Shift solenoid valve SR connector Battery negative (-) → Shift solenoid valve SR body Valve moves and makes an operating noise

      If the result is not as specified, replace the solenoid valve.

2. INSPECT SHIFT SOLENOID VALVE SLU AND SLT

   

   Text in Illustration

   *a	Component without harness connected (Shift Solenoid Valve)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 5.0 to 5.6 Ω

   2. Apply 12 V of battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

      OK
      Measurement Condition Specified Condition Battery positive (+) with a 21 W bulb → Terminal 2 Battery negative (-) → Terminal 1 Valve moves and makes an operating noise

      If the result is not as specified, replace the solenoid valve.

3. INSPECT SHIFT SOLENOID VALVE SL1 AND SL2

   

   Text in Illustration

   *a	Component without harness connected (Shift Solenoid Valve)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 5.0 to 5.6 Ω

   2. Apply 12 V of battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

      OK
      Measurement Condition Specified Condition Battery positive (+) with a 21 W bulb → Terminal 1 Battery negative (-) → Terminal 2 Valve moves and makes an operating noise

      If the result is not as specified, replace the solenoid valve.

4. INSPECT SHIFT SOLENOID VALVE S1

   

   Text in Illustration

   *a	Component without harness connected (Shift Solenoid Valve S1)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition Shift solenoid valve S1 connector terminal - Shift solenoid valve S1 body 20°C (68°F) 11 to 15 Ω

   2. Apply 12 V of battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Shift solenoid valve S1 connector Battery negative (-) → Shift solenoid valve S1 body Valve moves and makes an operating noise

      If the result is not as specified, replace the solenoid valve.

5. INSPECT SHIFT SOLENOID VALVE S2

   

   Text in Illustration

   *a	Component without harness connected (Shift Solenoid Valve S2)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition Shift solenoid valve S2 connector terminal - Shift solenoid valve S2 body 20°C (68°F) 11 to 15 Ω

   2. Apply 12 V of battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Shift solenoid valve S2 connector Battery negative (-) → Shift solenoid valve S2 body Valve moves and makes an operating noise

      If the result is not as specified, replace the solenoid valve.