TRANSMISSION CONTROL CABLE REMOVAL

PROCEDURE


  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. B001FEY

      Disconnect the transmission control cable end from the shift lever.

    3. B001D09

      Rotate the socket counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from the shift lever retainer.

      Note

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable will not be reusable.

    4. B001D9R

      Remove the nut and clip, and disconnect the transmission control cable assembly from the automatic transmission.

    5. B001EPN

      Remove the 2 nuts and disconnect the ground cable and transmission control cable support.

    6. B001HFH

      Remove the 2 nuts and detach the 3 claws, and then pull out the transmission control cable.