AUTOMATIC TRANSMISSION SYSTEM(for 1KD-FTV) TERMINALS OF ECU


  1. TCM

    B001CINE02

    Tech Tips

    The standard voltage at each TCM terminal is shown in the table below.

    In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to inspect. The standard voltage between the terminals is shown under "Specified Condition".

    Use the illustration above as a reference for the TCM terminals.

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    G70-5 (BATT) - G69-1 (E1) L - BR Battery (for measuring battery voltage and for TCM memory) Always 11 to 14 V
    G69-12 (NSW) - G69-1 (E1) B - BR PNP switch signal

    • Ignition switch ON

    • Shift lever in P or N

    		 Below 1 V

    • Ignition switch ON

    • Shift lever not in P or N

    		 11 to 14 V
    G69-11 (STA) - G69-1 (E1) W - BR Starter signal Cranking 6 V or higher
    G71-9 (R) - G69-1 (E1) R - BR R shift position switch signal

    • Ignition switch ON

    • Shift lever in R

    		 11 to 14 V

    • Ignition switch ON

    • Shift lever not in R

    		 Below 1 V
    G71-8 (D) - G69-1 (E1) B - BR D shift position switch signal

    • Ignition switch ON

    • Shift lever in D

    		 11 to 14 V

    • Ignition switch ON

    • Shift lever not in D

    		 Below 1 V
    G70-15 (S) - G69-1 (E1) V - BR S shift position switch signal

    • Ignition switch ON

    • Shift lever in S

    		 11 to 14 V

    • Ignition switch ON

    • Shift lever not in S

    		 Below 1 V
    G70-22 (SFTU) - G69-1 (E1) GR - BR Up-shift position switch signal

    • Ignition switch ON

    • Shift lever in S

    		 11 to 14 V

    • Ignition switch ON

    • Shift lever in "+" (up-shift)

    		 Below 1 V
    G70-23 (SFTD) - G69-1 (E1) LG - BR Down-shift position switch signal

    • Ignition switch ON

    • Shift lever in S

    		 11 to 14 V

    • Ignition switch ON

    • Shift lever in "-" (down-shift)

    		 Below 1 V
    G69-18 (S1) - G69-1 (E1) L - BR S1 solenoid signal Ignition switch ON 11 to 14 V
    1st or 2nd gear 11 to 14 V
    3rd, 4th or 5th gear Below 1 V
    G69-17 (S2) - G69-1 (E1) P - BR S2 solenoid signal Ignition switch ON Below 1 V
    2nd or 3rd gear 11 to 14 V
    1st, 4th or 5th gear Below 1 V
    G69-16 (SR) - G69-1 (E1) R - BR SR solenoid signal Ignition switch ON Below 1 V
    5th gear 11 to 14 V
    1st gear Below 1 V
    G69-9 (SL1+) - G69-8 (SL1-) V - R SL1 solenoid signal Engine idling Pulse generation
    G69-7 (SL2+) - G69-6 (SL2-) W - LG SL2 solenoid signal Engine idling Pulse generation
    G69-20 (SLT+) - G69-19 (SLT-) B - G SLT solenoid signal Engine idling Pulse generation
    G69-22 (SLU+) - G69-21 (SLU-) GR - LG SLU solenoid signal 4th gear (lock-up) or 5th gear (lock-up) Pulse generation
    G69-25 (THO1) - G69-23 (E2) V - W No. 1 ATF temperature sensor signal No. 1 ATF temperature: 115°C (239°F) or higher Below 1.5 V
    G69-24 (THO2) - G69-23 (E2) SB - W No. 2 ATF temperature sensor signal No. 2 ATF temperature: 115°C (239°F) or higher Below 1.5 V
    G70-14 (STP) - G69-1 (E1) V - BR Stop light switch signal Brake pedal is depressed 7.5 to 14 V
    Brake pedal is released Below 1.5 V
    G69-3 (NT+) - G69-2 (NT-) L - W Speed sensor NT signal Engine idling (shift lever in P or N)

    Pulse generation

    (See waveform 1)
    G69-30 (SP2+) - G69-29 (SP2-) L - LG Speed sensor SP2 signal Vehicle speed 20 km/h (12 mph)

    Pulse generation

    (See waveform 2)
    G71-15 (L4) - G69-1 (E1) R - BR L4 shift position switch signal

    • Ignition switch ON

    • Transfer in L4

    		 11 to 14 V

    • Ignition switch ON

    • Transfer not in L4

    		 Below 1.5 V
    G70-6 (IG2) - G69-1 (E1) B - BR Ignition switch Ignition switch ON 11 to 14 V
    G70-25 (SPD1) - G69-1 (E1) R - BR Vehicle speed signal Vehicle speed 20 km/h (12 mph)

    Pulse generation

    (See waveform 3)
    G70-21 (CAN+) - G69-1 (E1) B - BR CAN communication line Ignition switch ON

    Pulse generation

    (See waveform 4)
    G70-20 (CAN-) - G69-1 (E1) W - BR CAN communication line Ignition switch ON

    Pulse generation

    (See waveform 5)
    G70-13 (SNWI) - G69-1 (E1) GR - BR Pattern select (2ND) switch signal

    • Ignition switch ON

    • Pattern select (2ND) switch pushed

    		 Below 1 V

    • Ignition switch ON

    • Pattern select (2ND) switch not pushed

    		 11 to 14 V

    1. B001GM3E01
      *a 1 V/DIV.
      *b 2 msec./DIV.

      Using an oscilloscope, check waveform 1.

      Reference
      Terminal No. (Symbol) Tool Setting Condition
      G69-3 (NT+) - G69-2 (NT-) 1 V/DIV., 2 msec./DIV. Engine idling (shift lever in P or N)
    2. B001FHDE01
      *a 2 V/DIV.
      *b 20 msec./DIV.

      Using an oscilloscope, check waveform 2.

      Reference
      Terminal No. (Symbol) Tool Setting Condition
      G69-30 (SP2+) - G69-29 (SP2-) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)
    3. B001GV1E02
      *a 2 V/DIV.
      *b 20 msec./DIV.

      Using an oscilloscope, check waveform 3.

      Reference
      Terminal No. (Symbol) Tool Setting Condition
      G70-25 (SPD1) - G69-1 (E1) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)
    4. B001HHUE10
      *a 1 V/DIV.
      *b 10 msec./DIV.

      Using an oscilloscope, check waveform 4.

      Reference
      Terminal No. (Symbol) Tool Setting Condition
      G70-21 (CAN+) - G69-1 (E1) 1 V/DIV., 10 msec./DIV. Ignition switch ON
    5. B001IAGE09
      *a 1 V/DIV.
      *b 10 msec./DIV.

      Using an oscilloscope, check waveform 5.

      Reference
      Terminal No. (Symbol) Tool Setting Condition
      G70-20 (CAN-) - G69-1 (E1) 1 V/DIV., 10 msec./DIV. Ignition switch ON