DRIVING SUPPORT ECU REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

    A01XEZ2E01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the door scuff plate.

    2. Using a screwdriver, detach the 4 clips, 10 claws and 2 guides and remove the door scuff plate.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE COWL SIDE TRIM BOARD RH

    A01XED3

    1. Remove the clip.

    2. Detach the clip and claw and remove the cowl side trim board.

  3. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  4. REMOVE INSTRUMENT PANEL ORNAMENT

    Click here

  5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  7. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

    Click here

  8. REMOVE ECU INTEGRATION BOX RH

    Click here

  9. REMOVE DRIVING SUPPORT ECU ASSEMBLY

    A01XGF1

    1. Detach the claw and remove the driving support ECU assembly.