DRIVING SUPPORT ECU REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   
   

   • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

     Click here

   • When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

     Click here

2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

   Tech Tips

   Use the same procedure for the RH side and LH side.

   Click here

3. REMOVE COWL SIDE TRIM BOARD RH

   Tech Tips

   Use the same procedure for the RH side and LH side.

   Click here

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

   Click here

6. REMOVE INSTRUMENT SIDE PANEL RH

   Click here

7. REMOVE INSTRUMENT PANEL ORNAMENT

   Click here

8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

9. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

   Click here

10. REMOVE ECU INTEGRATION BOX RH (for LHD)

    Click here

11. REMOVE ECU INTEGRATION BOX LH (for RHD)

    Click here

12. REMOVE DRIVING SUPPORT ECU ASSEMBLY

    
    
    1. 

       *A	for LHD
       *B	for RHD

       Detach the 3 claws and remove the driving support ECU assembly.