FRONT CAMERA REMOVAL

CAUTION / NOTICE / HINT

Note


  • When replacing the forward recognition camera, replace it with a new one.

  • Do not touch the camera lens or the front windshield glass in front of the camera.

  • If the forward recognition camera has been struck or dropped, replace it with a new one.

  • When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, forward recognition camera system, lane departure alert system, road sign assist system or pre-crash safety system may not operate properly due to a difference in the transmissivity or black ceramic border.

  • w/ Camera Heater: Do not touch the internal components of the forward recognition with heater hood sub-assembly or press on the heater when working on the forward recognition with heater hood sub-assembly.

PROCEDURE


  1. REMOVE NO. 2 FORWARD RECOGNITION COVER


    1. B001HZCN01

      Detach the 2 claws in the direction indicated by the arrow (1) in the illustration.

      Note

      If the 2 claws are detached separately they may become damaged. Therefore, remove them at the same time.

    2. Detach the 2 guides in the direction indicated by the arrow (2) in the illustration to remove the No. 2 forward recognition cover.

  2. REMOVE NO. 1 FORWARD RECOGNITION COVER


    1. B001EYA

      Detach the 2 clips and 2 guides and remove the No. 1 forward recognition cover as shown in the illustration.

      Note

      When removing, press the cover parallel to the windshield glass surface and remove.

  3. REMOVE FORWARD RECOGNITION LATCH


    1. B001HPXN01

      Detach the 2 claws in the direction indicated by the arrow (1) in the illustration.

    2. Detach the 4 guides in the direction indicated by the arrow (2) in the illustration to remove the forward recognition latch.

  4. REMOVE FORWARD RECOGNITION CAMERA

    Note

    If the forward recognition camera has been struck or dropped, replace it with a new one.


    1. B001GLS

      Disconnect the connector.

      Note

      Do not pull the harness forcibly when disconnecting the connector.

    2. Detach the 4 guides and remove the forward recognition camera as shown in the illustration.

      Note


      • Do not apply excessive force.

      • If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

  5. REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY (w/ Camera Heater)

    Note

    Do not touch the internal components of the forward recognition with heater hood sub-assembly or press on the heater when working on the forward recognition with heater hood sub-assembly.

    B001IN2

    1. B001GVQ

      Disconnect the connector.

      Note

      Do not pull the harness forcibly when disconnecting the connector.

    2. B001GX0

      Detach the connector clamp.

    3. B001CAWN01

      Detach the 7 guides in the order shown in the illustration and remove the wire harness.

    4. B001E3JC02
      B001CE2 Heater Area

      Detach the 2 claws in the direction indicated by the arrow (1) in the illustration.

      Note

      Do not press the heater area.

    5. Detach the guide in the direction indicated by the arrow (2) in the illustration to remove the forward recognition with heater hood sub-assembly.