LANE DEPARTURE ALERT SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LANE DEPARTURE ALERT SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the Multi-information display


      1. Turn the ignition switch to ON.

      2. Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup

      3. Select the setting by referring to the table below.

      4. Change the settings of the lane departure alert using the steering pad switch assembly.

        LANE DEPARTURE ALERT SYSTEM
        Display Content Setting Default
        Sensitivity Timing of lane departure warning High/Standard Standard
        Sway Warning Vehicle sway warning function On/Off On
        Sway Sensitivity Vehicle sway detection sensitivity High/Standard/Low Standard