CRUISE CONTROL SYSTEM FREEZE FRAME DATA


  1. CHECK FREEZE FRAME DATA (READ BY GTS)

    Tech Tips

    The ECU data indicating the vehicle status is stored in the ECU as a freeze frame data simultaneously as the DTC is stored.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

    5. From the DTC screen, select the DTC (snow icon displayed) to which freeze frame data is recorded.

  2. LIST OF FREEZE FRAME DATA


    1. for 1GR-FE (for Manual Transmission):

      Powertrain > Cruise Control

      Tester Display
      CCS Vehicle Spd
      CCS Mem Vehicle Spd
      Throttle Opening Angle
      Cruise Control
      Cruise Main Switch Operation Condition
      Main SW M-CPU
      CCS Ready M-CPU
      CCS Indicator M-CPU
      Cancel Switch
      SET/COAST Switch
      RES/ACC Switch
      Stop Light Switch 1
      Stop Light Switch 2
      Cruise Operation Status
      Brake Cancel Switch

    2. except 1GR-FE (for Manual Transmission):

      Powertrain > Cruise Control

      Tester Display
      Cruise Vehicle Speed
      Cruise Memory Vehicle Speed
      Cruise Request Throttle Opening Angle
      Cruise Target Acceleration
      Driving Support ECU Target Acceleration
      Cruise Request Driving Force
      Cruise Request Driving Force Feedback Status
      Cruise Control Permission Condition
      Cruise Control Condition
      Cruise Main Switch Operation Condition
      Accelerator Pedal
      Stop Light Switch Sub-CPU
      Request Manual Cancel
      Request Automatic Cancel
      Cruise Brake Control Decision
      Cruise Brake Control Permission Condition
      Brake Cancel Switch