GLOW PLUG CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET

   
   

   1. Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

2. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET

   
   

   1. Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

3. INSTALL GLOW PLUG CONTROLLER

   
   

   1. Install the glow plug controller with the 2 nuts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the 4 connectors and clamp.

4. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

5. INSTALL FRONT FENDER MUDGUARD LH

   Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.