GLOW PLUG CONTROLLER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT FENDER MUDGUARD LH

    Click here

  4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  5. REMOVE GLOW PLUG CONTROLLER

    A01XDF8

    1. Disconnect the 4 connectors and clamp.

    2. Remove the 2 nuts and glow plug controller from the vehicle.

  6. REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET


    1. Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.

  7. REMOVE NO. 2 GLOW PLUG CONTROLLER BRACKET


    1. Remove the 2 screws and No. 2 glow plug controller bracket from the glow plug controller.