IGNITION SWITCH INSTALLATION

PROCEDURE

1. INSTALL IGNITION SWITCH ASSEMBLY

   
   

   1. for Manual Transmission:

      
      

      1. Install the ignition switch with the 2 screws.

      2. Connect the ignition switch connector and attach the wire harness clamp.

   2. for Automatic Transmission:

      
      

      1. Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.

      2. Install the ignition switch with the 2 screws.

      3. Connect the ignition switch connector and key interlock solenoid connector and attach the wire harness clamp.

2. INSTALL LOWER STEERING COLUMN COVER

   
   

   1. Attach the 2 claws to install the lower steering column cover.

   2. Install the 2 screws.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to install the 2 screws.