CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side.
PROCEDURE
REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH
REMOVE ASSIST GRIP COVER LH
REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH
REMOVE REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH
|
Protective Tape |
Disconnect the connector.
Using a screwdriver, detach the claw and remove the rear inside handle illumination light assembly LH.
Tech Tips
Tape the screwdriver tip before use.
REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
|
Remove in this Direction |
|
Connector |
Disconnect the connector.
Turn the No. 1 interior illumination light assembly in the direction indicated by the arrow and remove it.